|
No hay comentarios de productos.
IMAGE FUSING
1 August 1996
7.3 FUSING ENTRANCE GUIDE SHIFT MECHANISM
[B]
[C]
[A]
A193D539.wmf
The entrance guide [A] for this machine has two holes on the rear side of the entrance guide to adjust for thick or thin paper. Normally, the upper screw hole [B] is used. For thin paper, move the entrance guide up by securing it with screw hole [C]. This slightly lengthens the paper path, which prevents the paper from creasing in the fusing unit. For thick paper, move the entrance guide down (use the lower screw hole). This is because the lower setting allows more direct access to the gap between the hot and pressure rollers. This prevents thick paper from buckling against the hot roller, which can cause blurring at the leading edge of the copy. Also, thick paper does not bend as easily, and is therefore less prone to creasing.
2-60
|
